101
edits
Changes
→Akai MPK mini MK3
====The Mixer mode====
====The Mixer mode====
In this mode, you can use the Knobs directly to adjust the chains settings.
This is the default mode, but you can switch back to it with '''PROG CHANGE''':<code>PAD 5</code>. In this mode, you can use the Knobs to adjust chains settings. The general rule is: <code>PAD x</code> + <code>Knob y</code> to adjust the setting '''x''' of chain '''y'''. You can adjust chains 1 to 8 in bank A, and chains 9 to 16 in bank B. The functions that you can change are:
<p style="margin: 1em 0 1.5em">
<span class="warningbox">
'''NOTE''': Remember to put PAD CONTROLS in '''CC mode'''.
</span>
</p>
* <code>PAD 1 A</code> + <code>KNOBs 1-8</code> to adjust '''level''' of chains 1-8. <code>PAD 1 B</code> for chains 9-16.
* <code>PAD 2 A</code> + <code>KNOBs 1-8</code> for '''balance''' (panning) of chains 1-8. <code>PAD 2 B</code> for chains 9-16.
* <code>PAD 3 A</code> + <code>KNOBs 1-8</code> to toggle '''mute''' of chains 1-8. <code>PAD 3 B</code> for chains 9-16. Clockwise to set mute, counter clockwise to clear mute.
* <code>PAD 4 A</code> + <code>KNOBs 1-8</code> to toggle '''solo''' of chains 1-8. <code>PAD 4 B</code> for chains 9-16. Same rules apply as for muting.
The driver will remember the last function pressed, so for adjusting chains 1-8, you can just press the desired PAD (1-4), release it, and then adjust using the knobs. All knobs will affect that PAD's function. For chains 9-16, you need the keep the PAD pressed.
If you activate the '''FULL LEVEL''' option in the MPK, then the PADs function changes to '''select''' chain. PADs in bank A will select first 8 chains, and bank B is used to select chains 9-16.
<br clear=all>
<br clear=all>