Changes

This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:

This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:

* Change controllers' bank. There are '''two banks''' (1 and 2), which are used to handle up to 16 chains (with the eight track buttons/knobs). Bank 1 is for chains 1 to 8 and bank 2 manage chains 9 to 16. To show current selected bank, press and hold <code>SHIFT</code>. One of the track buttons <code>LEFT arrow</code> or <code>RIGHT arrow</code> will light up in red, <code>LEFT arrow</code> is bank 1 and <code>RIGHT arrow</code> is bank 2. You can also press one of these buttons while holding <code>SHIFT</code> to change the bank.

* Change controllers' bank. There are '''two banks''' (1 and 2), which are used to handle up to 16 chains (with the eight track buttons/knobs). Bank 1 is for chains 1 to 8 and bank 2 manage chains 9 to 16. To show current selected bank, press and hold <code>SHIFT</code>. One of the track buttons <code>LEFT arrow</code> or <code>RIGHT arrow</code> will light up in red, <code>LEFT arrow</code> is bank 1 and <code>RIGHT arrow</code> is bank 2. You can press one of these buttons while holding <code>SHIFT</code> to change the bank.

* Use track buttons to '''perform a function''' on chains. The function is chosen by pressing <code>SHIFT</code> + one of <code>SELECT</code>, <code>MUTE</code> or <code>SOLO</code> soft key buttons. Press and hold <code>SHIFT</code> to see current selected function on soft key buttons (in green). Functions are:

* Use track buttons to '''perform a function''' on chains. The function is chosen by pressing <code>SHIFT</code> + one of <code>SELECT</code>, <code>MUTE</code> or <code>SOLO</code> soft key buttons. Press and hold <code>SHIFT</code> to see current selected function on soft key buttons (in green). Functions are:

* Start '''recording a pattern'''. For this, press <code>RECORD</code> + a pad button, which will 1) select the chain associated with the group of the sequence, 2) open the pattern editor for that sequence, 3) start playing the sequence and 4) start recording that sequence. If you press the pad again (without holding any other button), the recording will stop. Press again to stop playback too. You can also control the playback/recording with <code>PLAY/PAUSE</code> and <code>RECORD</code> buttons.  

* Start '''recording a pattern'''. For this, press <code>RECORD</code> + a pad button, which will 1) select the chain associated with the group of the sequence, 2) open the pattern editor for that sequence, 3) start playing the sequence and 4) start recording that sequence. If you press the pad again (without holding any other button), the recording will stop. Press again to stop playback too. You can also control the playback/recording with <code>PLAY/PAUSE</code> and <code>RECORD</code> buttons.  

* If the pattern editor is open, press <code>SHIFT</code> + <code>UP arrow</code> to '''go back to ZynPad'''. Press it again to go to mixer screen.  

* If the pattern editor is open, press <code>SHIFT</code> + <code>UP arrow</code> to '''go back to ZynPad'''. Press it again to go to mixer screen.

====The Device mode====

====The Device mode====