Changes

Supported plug & play MIDI controllers (view source)

Revision as of 07:50, 3 March 2024

122 bytes added , 3 March

Line 64: Line 64:

* Open the '''sequence manager''' (also known as the ''Seqman'' sub-mode), pressing <code>SHIFT</code> + <code>CLIP STOP</code>. If this mode is active, the LED of the <code>CLIP STOP</code> button will blink in green, and one of <code>VOLUME</code>, <code>PAN</code> or <code>SEND</code> buttons will also be solid in red, each one related to a specific function:

−

** <code>VOLUME</code>: this is COPY mode. Press the pad of a non-empty sequence to mark it as source (it will blink fast). Press another pad to copy the selected source to it. Press the selected source pad to clear selection.

+

** <code>SEND</code>: this is CLEAR mode. It will remove all patterns of the sequence when its pad is pressed (leaving only a single empty pattern).

−

** <code>PAN</code>: this is MOVE mode. It works like COPY mode, but also ~~removes~~ the source sequence.

+

** <code>VOLUME</code>: this is COPY mode. Press the pad of a non-empty sequence to mark it as source (it will blink fast). Press another pad to copy the selected source to it. It will CLEAR the destination sequence, and then copy all the patterns of the source sequence. Press the selected source pad to clear selection.

−

** <code>SEND</code>: this is CLEAR mode. It will remove any notes on first pattern of sequence when its pad is pressed.

+

** <code>PAN</code>: this is MOVE mode. It works like COPY mode, but also CLEARS the source sequence.

** Use <code>LEFT</code> and <code>RIGHT</code> arrows to move from one scene to another. You can also copy/move patterns between scenes.

** Press <code>SHIFT</code> + <code>SELECT</code> to exit this sub-mode.

Oscaracena

101

edits