2,703
edits
Changes
Jump to navigation
Jump to search
Line 161:
Line 161: − +
Building a Zynthian Box using an official Kit v4.1 (view source)
Revision as of 16:33, 19 October 2020
, 16:33, 19 October 2020→Mount the MIDI activity LEDS
Since the LED's leads are too long, you will want to cut them down to about 7-8mm. Make sure you remember which lead is the short one. When inserting the dupont connector, if you feel that it doesn't grab the pins enough, you should press the tiny metal-jacket inside the plastic capsule to make it narrow. It's easy, simply put the dupont connector over the desk and press the metal with the screwdriver tip or something like that.
Since the LED's leads are too long, you will want to cut them down to about 7-8mm. Make sure you remember which lead is the short one. When inserting the dupont connector, if you feel that it doesn't grab the pins enough, you should press the tiny metal-jacket inside the plastic capsule to make it narrow. It's easy, simply put the dupont connector over the desk and press the metal with the screwdriver tip or something like that.
[[File:IMG2406.JPG|800px]]
[[File:IMG2406_fixv41.JPG|800px]]