Changes

Specifically, these instructions are for assembling kit v4 (version 4), those kits using the Zynaptik circuit and the ZynScreen v1.5 display.

Specifically, these instructions are for assembling kit v4 (version 4), those kits using the Zynaptik circuit and the ZynScreen v1.5 display.

[[File:ZynthianFront.jpg|600px]]

[[File:IMG_3148_OK_1024.JPG|600px]][[File:IMG_3145_OK_1024.JPG|600px]]

 

[[File:ZynthianBack.jpg|600px]]

=List of Materials=

=List of Materials=

The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case. Remember to remove the protective film from the screen before mounting it.

The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case, same that the silicone keypad. Remember to remove the protective film from the screen before mounting it.

[[File:Rotary&wire.JPG|400px]]

[[File:Rotary&wire.JPG|400px]]

[[File:ZynScreen&Controller.JPG|400px]]

[[File:ZynScreen&Controller.JPG|400px]]

[[File:IMG_1401.JPG|400px]]

[[File:IMG_3105_OK_1024.JPG|400px]]

===Attach the knobs===

===Attach the knobs===

I recommend you take a look at [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc-pro Hifiberry DAC+ADC PRO specification].

I recommend you take a look at [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc-pro Hifiberry DAC+ADC PRO specification].

===Connect the Display===

===Connect the Display===

[[File:Screen&Ribbon.JPG|500px]]

[[File:Screen&Ribbon.JPG|500px]]

[[File:Precierre.JPG|400px]]

[[File:IMG_3126_OK_1024.JPG|600px]]

'''And that's all!!''' Your Zynthian Box is almost ready to boot. I recommend that you double-check everything before powering up the device.

'''And that's all!!''' Your Zynthian Box is almost ready to boot. I recommend that you double-check everything before powering up the device.

=Testing your Zynthian Box=

=Testing your Zynthian Box=

Once everything is in its place and you have tested that it works, it's time to close the case

Once everything is in its place and you have tested that it works, it's time to close the case

===Close the case===

===Close the case===

[[File:Precierre.JPG|600px]]

[[File:IMG_3126_OK_1024.JPG|600px]]

[[File:ZynthianFront.jpg|600px]]

[[File:IMG_3148_OK_1024.JPG|800px]]

=Update your Zynthian Box=

=Update your Zynthian Box=