Line 345: |
Line 345: |
| etc. | | etc. |
| | | |
− | ===Testing the Audio=== | + | ===Test the Audio=== |
| | | |
− | ===Testing the MIDI=== | + | 1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers. |
| + | 2. Boot your Zynthian. You should be in the initial 'Load Snapshot' screen. |
| + | 3. Push BACK twice to get into the 'Admin' screen. |
| + | 4. Select 'Audio Test' option and push 'SELECT' |
| + | |
| + | You should hear the test audio-track: a nice afrocuban stuff ;-) |
| + | |
| + | If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]]. |
| + | |
| + | ===Test the MIDI=== |
| + | |
| + | 1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers. |
| + | 2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank. |
| + | 3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen. |
| + | 4. Select 'MIDI Test' option and push 'SELECT' |
| + | |
| + | You should hear the test midi-track: a 'Take Five' version ;-) |
| + | |
| + | If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]]. |
| | | |
| =Close the Case= | | =Close the Case= |