Changes

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand.

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand. Put attention to the cable not moving out the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

<br clear=all>

<br clear=all>