2,718
edits
Changes
no edit summary
=Previous Requirements=
='''Previous Requirements'''=
==BOM V5 kit:==
=='''BOM V5 kit'''==
* Aluminum Case
* Aluminum Case
* Main Board
* Main Board
* SD-Card (NOT included in V5 kit)
* SD-Card (NOT included in V5 kit)
==Tools:==
=='''Tools'''==
* Allen Spanner 1.5 mm
* Allen Spanner 1.5 mm
* Allen Spanner 2.0 mm
* Allen Spanner 2.0 mm
<br clear=all>
<br clear=all>
=General Advice=
='''General Advice'''=
* Read & follow carefully the assembling instructions. Don't ignore any guidance or recommendation. We are quite lazy, so we should had some important reason to write it.
* Read & follow carefully the assembling instructions. Don't ignore any guidance or recommendation. We are quite lazy, so we should had some important reason to write it.
* Again! Please, be extremely delicate when manipulating the flat cable connectors (FPC). They are the weakest parts and can be easily broken. Look carefully the photos/videos and proceed just in the way we recommend. Use 2 hands, one finger from each hand. Avoid manipulating the connectors with a single hand or finger. And don't use any tool for this!!
* Again! Please, be extremely delicate when manipulating the flat cable connectors (FPC). They are the weakest parts and can be easily broken. Look carefully the photos/videos and proceed just in the way we recommend. Use 2 hands, one finger from each hand. Avoid manipulating the connectors with a single hand or finger. And don't use any tool for this!!
=I. BOTTOM PART=
='''I. BOTTOM PART'''=
=='''Step 0: Dump the screws bag in a apropiate recipient'''==
=='''Step 0: Dump the screws bag in a apropiate recipient'''==
<br clear=all>
<br clear=all>
='''Step 1: Sticking the rubber feet to the aluminum case bottom'''==
=='''Step 1: Sticking the rubber feet to the aluminum case bottom'''==
1. Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
1. Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
<br clear=all>
<br clear=all>
Step 4: Assemble the Main Board into the aluminum case bottom
=='''Step 4: Assemble the Main Board into the aluminum case bottom'''==
1. Take the main board from its case:
1. Take the main board from its case:
=II. TOP PART =
='''II. TOP PART'''=