2,718
edits
Changes
→I. BOTTOM PART
6. Remove the transparent protective sheet from the piece of thermal pad sticked in the thermal block bottom and softly place the Main Board in the aluminum case bottom. Fixate it using 7 x ISO7380 M3 screws.
6. Remove the transparent protective sheet from the piece of thermal pad sticked in the thermal block bottom and softly place the Main Board in the aluminum case bottom. Fixate it using 7 x ISO7380 M3 screws.
<br clear=all>
=='''Step 5: Plug SD-card & USB-C adapters'''==
[[File:IMG_4202_fixed_wiki.JPG|400px|right]]
'''1.''' Look for the SD-card & USB-C adapters in the wiring bag.
<br clear=all>
[[File:IMG_4202_fixed_wiki.JPG|400px|right]]
'''2.''' Carefully, using 2 fingers, one each hand, pull the main board's SD-card connector tongue until it's totally open.
<br clear=all>
[[File:IMG_4202_fixed_wiki.JPG|400px|right]]
'''3.''' Insert the SD-card adapter's ribbon cable, leaving the blue face upside. It must be inserted straight, until the end. Then push the tongue with 2 fingers at once and close the connector.
<br clear=all>
<br clear=all>
='''II. TOP PART'''=
='''II. TOP PART'''=