2,703
edits
Changes
Jump to navigation
Jump to search
Line 25:
Line 25: + + − − [[File:Zynaptik_kit_insert_header.png|300px|right]] Line 52:
Line 52: −
Adding Extra I/O with the Zynaptik Module (view source)
Revision as of 11:49, 14 January 2021
, 11:49, 14 January 2021→Installing Zynaptik Expander Kit
=== Installing Zynaptik Expander Kit ===
=== Installing Zynaptik Expander Kit ===
[[File:Zynaptik_kit_insert_header.png|300px|right]]
The core Zynthian kit is designed to allow novice to build a full device. Beware that the Zynaptik expander kit installation is more challenging, requiring some electronic construction skills including soldering and cutting. An intermediate hobbyist should be able to tackle the installation.
The core Zynthian kit is designed to allow novice to build a full device. Beware that the Zynaptik expander kit installation is more challenging, requiring some electronic construction skills including soldering and cutting. An intermediate hobbyist should be able to tackle the installation.
Insert one of the 10-pin 90 degree headers into the ADS1115 module. The pins go into the component side of the PCB extended through to the solder side. The ADS1115 is on the bent pin side of the header's plastic strip, not the straight pin side.
Insert one of the 10-pin 90 degree headers into the ADS1115 module. The pins go into the component side of the PCB extended through to the solder side. The ADS1115 is on the bent pin side of the header's plastic strip, not the straight pin side.
Insert the 40 pin header into the PCB with the short pins extending from the component side, through the PCB so that the plastic base sits on top of the component side of the PCB with its longer pins pointing up above the component side. It does not matter which way round this is inserted. Solder the short pins to the PCB.
Insert the 40 pin header into the PCB with the short pins extending from the component side, through the PCB so that the plastic base sits on top of the component side of the PCB with its longer pins pointing up above the component side. It does not matter which way round this is inserted. Solder the short pins to the PCB.
<br clear=all>
<br clear=all>