Changes

* 4 x Analog Ouput  

* 4 x Analog Ouput  

'''New modules''' (from 2021-04-01) include everything soldered on. Ready to work:

'''New modules''' (''Zynaptik-2'' from 2021-04-01 & ''Zynaptik-3 Extended'' from 2022-03-10) include everything soldered on and they are ready to work:

 

[[File:Zynaptik2_top.jpg|900px]]

[[File:Zynaptik2_top.jpg|900px]]

'''+ ADS1115 (MOD-1 Analog Input):''' It uses I2C address 0x48 by default. The 4 analog input pins are labelled as ADx on the Zynaptik's header schematic.

'''+ ADS1115 (MOD-1 Analog Input):''' It uses I2C address 0x48 by default. The 4 analog input pins are labelled as ADx on the Zynaptik's header schematic.

You can assign the Analog Inputs to MIDI events like Pitch-Bending, CC or ChanPress. This can be used for connecting CV-IN or for controlling sound engine parameters using analog sensors.

The voltage range is 0-5V. You can assign the Analog Inputs to MIDI events like Pitch-Bending, CC or ChanPress and use the analog signals for controlling any sound parameter. Analog Inputs can be combined with digital inputs from the MCP23017, allowing to configure up to 4 x CV/Gate-IN interfaces.

'''+ MCP4728 (MOD-2 Analog Output):''' It uses I2C address 0x60 by default. The 4 analog output pins are labelled as DAx on the Zynaptik's header schematic.  

'''+ MCP4728 (MOD-2 Analog Output):''' It uses different I2C address (0x60/0x61/0x64) depending of the zynaptik model. The 4 analog output pins are labelled as DAx on the Zynaptik's header schematic.  

It's being implemented currently and it's not available on zynthian software yet.

The voltage range is 0-5V. You can assign MIDI events, like Pitch-Bending, CC or ChanPress, to the Analog Outputs. Analog Outputs can be combined with digital outputs from the MCP23017, allowing to configure up to 4 x CV/Gate-OUT interfaces.

<br clear=all>

<br clear=all>