Line 26: |
Line 26: |
| | | |
| [https://aliexpress.com/item/32975204887.html Buy MCP4728 module] | | [https://aliexpress.com/item/32975204887.html Buy MCP4728 module] |
| + | |
| + | <br clear=all> |
| + | |
| + | === Configuring the Zynaptik Module from the Webconf === |
| + | |
| + | [[File:Zynthian_webconf_wiring_zynaptik_config.png|600px|right]] |
| + | |
| + | First, you should choose the right configuration for your zynaptik module depending on the extra modules you have soldered on it: |
| + | |
| + | * '''16xSWITCH''' => Only MCP23017, use the 16 GPIOs as customizable switches |
| + | * '''8xSWITCH''' => Only MCP23017, use the 8 GPIOs as customizable switches (Bank A) |
| + | * '''4xAD''' => Only ADS1115 (use the 4 ADs for Analog Input, obvious) |
| + | * '''16xSWITCH + 4xAD''' => MCP23017 + ADS1115, use the 16 GPIOs as customizable switches |
| + | * '''8xSWITCH + 4xAD''' => MCP23017 + ADS1115, use the 8 GPIOs as customizable switches (Bank A) |
| + | |
| + | After saving, you may want to configure your switches and/or analog inputs. |
| + | |
| + | === Configuring Zynaptik Customizable Switches === |
| + | |
| + | Simply add the switches pins to the list. Zynaptik MCP23017 pins start at 200. You don't need to add all the 16/8 available switches. If you only want to use 2, simply add "200,201". |
| + | After saving, you will see that the extra custom switches are available for configuration. |
| + | |
| + | <br clear=all> |
| + | |
| + | === Configuring Zynaptik Analog Input === |
| + | |
| + | [[File:Zynthian_webconf_wiring_zynaptik_ad.png|600px|right]] |
| + | |
| + | Simply configure your analog inputs from the webconf's wiring section in the same way you configure your custom switches. |
| + | |
| + | <br clear=all> |