Line 1:
Line 1:
−
The Zynthian User Interface is formed by 4 rotary encoders with switch and one TFT display.
+
Here's a list of the things Zynthian can do: [[Zynthian Features]]
−
The encoders/switches are used to navigate between the different screens/menus, select options and change the instrument parameters, acting as MIDI/OSC controllers.
−
Currently there are two screen patterns:
+
The Zynthian has 4 user interfaces:
−
- '''Selector Screen''': a list of items that you can scroll and select with the SELECT(4) encoder/switch
+
1. [[Zynthian UI Users Guide|UI Users Guide]]: The Hardware UI.
−
- '''Controller Screen''': In the corners, 4 control widgets (one for each encoder/switch), with label and value indicator (graphic and numeric). In the middle, a list of controller maps to which you can change or rotate using the SELECT(4) encoder/switch.
−
There are 3 types of clicks (press):
+
2. [[Configuration Users Guide]]: Web Configuration Tool.
−
- '''short:''' inferior than 0.3 seconds
+
3. [[MOD Users Guide]]: Plugin Host Web UI.
−
- '''bold:''' between 0.3 and 2 seconds
−
- '''long:''' major than 2 seconds
−
The short click is used to rotate between channels (CHAN(1)) or between controller sets (SELECT(4)). For better understanding, see the next flowchart:
+
4. [[Command Line User Guide]]: If you need to manually setup/configure things.
−
+
[[Understanding LINUX Audio]] Help in understanding all those acronyms mentioned in this Wiki
−
[[File:Visio-Diagrama flux v2.png]]
−
−
The screens are:
−
−
- ADMIN: Updating zynthian software, updating system, ...
−
- ENGINE: Synth engine selection
−
- CHAN: MIDI Channel selection
−
- BANK: Bank selection
−
- INSTRUMENT SELECT: Preset Selection
−
- INSTRUMENT CONTROL: Main Controller Screen
−
- CONTROLLERS: Controller Map Selection