Line 8:
Line 8:
==Akai APC Key25 MK2==
==Akai APC Key25 MK2==
−
−
[[File:akai_apc_key25_mk2.png|800px|right]]
This device supports two operation modes (and a third is in progress):
This device supports two operation modes (and a third is in progress):
−
# The default mode (called '''"Mixpad"''' in this section), which controls the ZynMixer and the ZynPad.
+
* The '''"MixPad"''' mode (default), which controls the Zynthian's Mixer and ZynPad.
−
# The '''"Device"''' mode, which handles the Zynthian UI.
+
* The '''"Device"''' mode, which handles the Zynthian UI.
+
* The '''"Sequencer"''' mode, which handles the Zynthian Step Sequencer.
====The Mixpad mode====
====The Mixpad mode====
+
+
[[File:akai_apc_key25_mk2.png|800px|right]]
This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:
This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:
Line 77:
Line 78:
The nearest four knobs has the functions of '''Knob#1''' to '''Knob#4'''. They can be used to control volume of selected/main chain, move vertically/horizontally in pattern editor or Zynpad, move selected item in menus, etc. Press <code>SHIFT</code> with a knob for a coarse (faster) adjustment. The knob press is activated using the first four soft keys to the left (in green), and also has short/bold press support. The mapping is: '''Knob#1''' = (<code>K1</code>, <code>CLIP STOP</code>); '''Knob#2''' = (<code>K5</code>, <code>SOLO</code>); '''Knob#3''' = (<code>K2</code>, <code>MUTE</code>); '''Knob#1''' = (<code>K6</code>, <code>REC ARM</code>). This scheme is very comfortable in the V4 four-corners layout.
The nearest four knobs has the functions of '''Knob#1''' to '''Knob#4'''. They can be used to control volume of selected/main chain, move vertically/horizontally in pattern editor or Zynpad, move selected item in menus, etc. Press <code>SHIFT</code> with a knob for a coarse (faster) adjustment. The knob press is activated using the first four soft keys to the left (in green), and also has short/bold press support. The mapping is: '''Knob#1''' = (<code>K1</code>, <code>CLIP STOP</code>); '''Knob#2''' = (<code>K5</code>, <code>SOLO</code>); '''Knob#3''' = (<code>K2</code>, <code>MUTE</code>); '''Knob#1''' = (<code>K6</code>, <code>REC ARM</code>). This scheme is very comfortable in the V4 four-corners layout.
+
+
====The Step Sequencer mode====
+
+
To write ...
<br clear=all>
<br clear=all>