Page history
20 January 2025
→Assemble the Main Board into the aluminum case bottom
+2
→Assemble the Main Board into the aluminum case bottom
+207
21 October 2024
→Attach and secure the knobs: caption for SDcard tool
m+103
→Close the aluminum case: Add first boot splash screen
+71
19 October 2024
→Close the aluminum case
+190
→BOTTOM PART
m+8
→BOTTOM PART: clearer instructions on plugging in display cable
+315
11 October 2024
26 September 2024
→Plug SD-card adapter
+6
→Plug USB-C adapter
+6
→Plug the flat ribbon cable into the control board
+6
→Plug the display flat cable into the display
+6
→Plug the control flat cable into the main board
+6
17 September 2024
→Plug the display ribbon cable into the RPi5
-15
→Plug the display ribbon cable into the RPi4
→Attach and secure the knobs
+69
16 September 2024
→Plug USB-C adapter
→Attach and secure the knobs
+46
→Close the aluminum case
+83
→Plug the display flat cable into the display
-3
→Plug the display flat cable into the display
→Plug the control flat cable into the main board
+696
→Plug the control flat cable into the main board
+198
→Plug the display flat cable into the display
-36
→Attach and secure the knobs
+6
→Close the aluminum case
-155
→Plug the control flat cable into the main board
+75
→Plug the display flat cable into the display
+359
→Secure the control board, silicone buttons and display to the aluminum case top
+4
→Assemble the display on the control board
-222
→Secure the top-spacers on the control board
-279
→Plug USB-C adapter
+62
→Plug USB-C adapter
→Plug USB-C adapter
+11
→Plug SD-card adapter
+34
→Plug SD-card adapter
+194
→Assemble the Main Board into the aluminum case bottom
+15
→Assemble the Main Board into the aluminum case bottom
-6
→Assemble the Main Board into the aluminum case bottom
-5
→Assemble the Main Board into the aluminum case bottom
+8
→Assemble the Main Board into the aluminum case bottom
-24
→Stick the SD-card holder cover
-741
→Assemble the Main Board into the aluminum case bottom
-1
→Assemble the Main Board into the aluminum case bottom
+898
→Stick the rubber feet to the aluminum case bottom
→Stick the rubber feet to the aluminum case bottom
+15
→Stick the rubber feet to the aluminum case bottom
+52
→Install the thermal block
+2
→Install the thermal block
+71